Pages: [1]   Go Down
  Print  
Author Topic: CM-64 cables  (Read 1753 times)
0 Members and 2 Guests are viewing this topic.
inaski
Associate Member
*
Offline Offline

Posts: 24


View Profile
« on: September 03, 2004, 09:45:54 AM »

I just bought a CM-64 from ebay, what kind of cables do I need to connect it to the soundcard line in? Does it use 6.3mm mono jacks like this:

Logged
shad0wfax
Guest
« Reply #1 on: September 03, 2004, 10:21:02 AM »

Hi,

Most sound cards use a stereo mini-jack (3,5mm) as a line-in connector, so probably you'll need a cable with two mono jacks (6,3mm) in one side (CM-64 line out) and one stereo mini-jack (3,5mm) in the other side (sound card line-in). I think it's not easy to find those cables. If you are good with the soldering iron it's pretty easy to build one. If you don't want to biuld one yourself and don't find the right cable, you also could use jack-to-RCA adaptors (put them on the CM-64) and then get a RCA-minijack cable, which is quite easy to find.
Logged
inaski
Associate Member
*
Offline Offline

Posts: 24


View Profile
« Reply #2 on: September 03, 2004, 01:39:39 PM »

I just needed to know if the CM-64 uses the 6.3mm jacks for output like the MT-32.  Yeah it's easy to build one of those cables, and I hapen to have the parts for it too. Thanks for the info.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to: