Pages: [1]   Go Down
  Print  
Author Topic: SCC-1 Output when MT-32 Output Desired  (Read 1595 times)
0 Members and 1 Guest are viewing this topic.
redmanandkay
Guest
« on: September 10, 2005, 07:26:01 PM »

Hi,

If I purchased a SCC-1 and connected an MT-32 to it, would both devices output simultaneously? If so, can you disable the output on the SCC-1 while still retaining the MPU401 style compatiblity to enable intelligent mode with the MT-32?

Thanks.
Logged
Laust
Senior Member
*
Offline Offline

Posts: 722


View Profile
« Reply #1 on: September 10, 2005, 08:26:07 PM »

http://www.queststudios.com/quest/Utilities.html

The first download on that page should do what you want.
Logged
redmanandkay
Guest
« Reply #2 on: September 11, 2005, 06:48:58 AM »

Thanks for that, excellent. My last question is how long do these SysEx files work for, is it until i run the partson.mid or only until I reboot?

Thanks
Logged
Juho Sippola
Senior Member
*
Offline Offline

Posts: 294


View Profile WWW
« Reply #3 on: September 11, 2005, 08:22:28 AM »

IIRC the SysEx programmings in SCC-1 are CTRL-ALT-DEL/resetproof so you'll have to power down the computer entirely to clear them off. However, GS reset SysEx will do so you don't have to power down.
Logged
redmanandkay
Guest
« Reply #4 on: September 11, 2005, 08:33:26 AM »

Thanks for that!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to: